Water Purification Systems

High quality demineralized water guarantees consistent, optimal performance and extends the life of your sterilizer and of your instruments.

The system connects to mains water and produces high quality demineralized water. It comes with a convenient spray gun which can be used for manually filling other devices or rinsing instruments prior to sterilization.

The AquaClave RO P5 avoids the administrative inefficiency and high cost of purchasing bottled distilled water in dental, medical, hospital and veterinarian surgeries. This Australian developed process produces up to 50 litres per day of water with less than 1ppm in total dissolved solids - a higher purity than required by AS 2182-1998 Appendix C.* (* Water for steam generation in AS 2182-1998)

The AquaClave RO P5 is a multistage system relying on a number of technologies to deliver water in autoclave sterilization equipment. The system provides for manual flushing of the membrane to ensure consistency in high water quality. Careful attention to pretreatment of the water prior to entering the reverse osmosis membrane is provided. This critical process removes suspended solids, dissolved organic matter (including Giardia & Cryptosporidium), and chlorine.

Reverse Osmosis - The reverse osmosis membrane has been engineered scientifically to produce exceptionally high quality water. The AquaClave is supplied with a Total Dissolved Solids meter to check that the treated water meets the required high quality.

A water polishing system is provided to remove residual organic and non-organic elements thereby generating water at less than 1ppm total dissolved solids at flow rate of 4 litres per minute.

 

 

Filter set of 4 Cartridges

 

ION exchange Resins

Rate of flow lt/min between 0.5 and 0.7

Height: 540mm, Width: 160mm, Depth: 230mm

Operating weight (mass): 5.6kg

Mains water pressure bar between 1 and 4.5

Mains water conductivity equal to 650 µS/cm, 2,5 average cycles per day

Constant and automatic check of the water conductivity on two thresholds (15 and 30 µS/cm)

Compact, Simple to install, Easy maintenance thanks to the disposable purification block.

Resin Refill cartridges for Speedy Water system

 

 

Kit includes a constant and automatic water quality check which at 15uS/cm will display a "replace catridge" message and at 20uS/cm will stop supply.

Packaging dimensions: 28x42x25cm (W x H x D), Instrument dimensions: 20x36cm (Ø x H), Weight net/gross: 3.5/4kg, Power consumption: 580 W

• Produces 100% of pure distilled water
• Auto shut-off
• Easy to clean
• Economic